- Size: 25.0mm*48.0mm*104.0mm
- Weight: 143.2g
- E-liquid capacity: 2ml
- Output wattage: 1-85W
- Maximum charging current: 2A
- Maximum output current: 50A
- Thread type: 510 thread
- Battery type: high-rate 18650 battery
- (Continuous discharge current should be above 25A)
- Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
- Resistance range: 0.05-1.5ohm (TC modes)
- 0.1-3.5ohm (VW mode)
- Standard configuration:
|1×iStick Pico 25 (without battery) 1×ELLO Atomizer|
|1×HW1 Single-Cylinder 0.2ohm Head 1×HW2 Dual-Cylinder 0.3ohm Head|
|1×QC USB Cable 2×User Manuals Spare Parts|
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
The iStick Pico 25 can handle various tanks up to 25mm diameter.
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
The iStick Pico 25 comes with the HW coils: HW1 Single-Cylinder 0.2ohm Head and HW2 Dual-Cylinder 0.3ohm Head, providing you with different vaping experience.
Note: All the data above was based on the tests by Eleaf factory. Only for your reference.
To fill the ELLO tank, you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
All parts of the ELLO tank can be detached and reassembled, allowing great convenience to clean them.
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
over-charging, over-current and over-discharging.
wall adapter or computer or charged with an external battery charger.